Lyngdorf BW-2 (black/white)

1,450.00

Lyngdorf BW-2

The active BW-2 is designed as a high bandwidth subwoofer with the objective of reproducing music and soundtracks with full dynamics and precision. The minimalistic – ‘form follows function’ design ensures that all resources are focused on the best possible sound reproduction.

The frequency range of the BW-2 goes up to 800 Hz in “bypass” mode, in contrast to traditional subwoofers, which are typically limited to 120 Hz. In other words, this is a driver that follows the signal with extreme precision. It therefore can actually play music and not just the low-end rumble and explosions of an action movie.

Easy to integrate

The BW-2 is designed with a focus on discretion. Available in high-gloss black or matte white – allowing for seamless integration in any contemporary interior. It can be positioned standing upright or on the side in order to fit into the available space. This also makes it the perfect match for any stereo or home cinema system.

Refined Class D power

The internal amplifier is our own Class-D design based on our more than 15 years of experience in designing audiophile Class-D amplifiers. With an output of 400 watts it can deliver ample power to control the driver even at extreme levels.

More than a subwoofer

The BW-2 has two input modes. If you set it to “Line in,” it can be used with conventional amplifiers and processors and has a frequency range from 25 to 200 Hz. As with regular subwoofers, you have control over level, frequency range, and phase adjustment.vIf you have a Lyngdorf Audio amplifier, you can bypass the internal filters. Now the frequency range goes up to 800 Hz, and you can use the BW-2 as a boundary woofer to lift the performance of your system to a new level.

Lyngdorf MH-2 speaker and BW-2 woofer in white
BW-2 white without grill
BW-2 and MH-2 in black

Gabriel fabric covers

The Lyngdorf loudspeakers MH-2, MH-3, FR-1 as well as the boundary woofers BW-2 and BW-3 are available with higher-quality fabric covers in five colors. The fabrics are made by Gabriel from Denmark. Gabriel is one of the leading fabric specialists since 1851 and creates the finest fabrics for furniture and interiors. The fabric has been specifically created for acoustic use and still provides a dense, high-quality woven cover. It is OEKO-TEX® STANDARD 100 certified. The fabric is attached to a new, very rigid frame, which avoids resonance and retains its shape for years to come.

While the Lyngdorf speakers and woofers in black cabinets are supplied with a black fabric cover, and speakers and woofer in white cabinets with a grey fabric cover, all fabric covers are available as an accessory. The covers are available in black, petrol blue, dusty green, grey, and red.

Gabriel fabric cover in black for MH-3
Gabriel fabric cover in blaue for MH-3
Gabriel fabric cover in green for MH-3
Gabriel fabric cover in grey for MH-3
Gabriel fabric cover in black for MH-3
BW-2 technical drawings

Specifications

Description: Active high bandwidth subwoofer
Driver: 10” long throw driver (+/- 15mm/0.6 in), Ø 50mm / 2in voice coil, Cone Material: Deep Anodized aluminum, 86oz / 2.4kg vented magnet
Amplifier: 400 W RMS, Class-D type
Enclosure: 
Closed cabinet type, full MDF construction, volume: 14 liters
Frequency Response: 25 to 200 Hz (using line in input), 25 to 800 Hz (using bypass input)
Maximum SPL: 106 dB RMS THX method: 40-80 Hz
Crossover point: X-over frequency (60 to 200 Hz)
Connections: RCA / analog mono input
Dimensions (W x H x D): 44 x 32.5 x 17.2 cm, 17.3 x 12.8 x 6.8 inches
Weight: 14.4 kg / 31.7 lb
Finish: Matte black with black fabric cover, matte white with grey fabric cover, five fabric colors available as accessory

Downloads:
Technical drawings
Owner’s manual
Fact sheet
Pictures

lyngdorf

lyngdorf

Couleurs

,